Industrial AAC Block Production Line 1.1Mpa-1.4Mpa Pressure For Block Production Line
Contact Person : lemon
Phone Number : 18639025156
WhatsApp : +8618639025156
|Minimum Order Quantity :||1Pc||Packaging Details :||Standard Packing For Export|
|Delivery Time :||20-45 Days||Supply Ability :||30Set/Per Month|
|Place of Origin:||Henan,China||Brand Name:||WD|
|Certification:||BIS ISO9001:2008 CE||Model Number:||HL315|
|Lift Height:||<=30.16m||Materlar-in Grade:||<=45mm|
autoclaved aerated concrete machine,
autoclaved aerated concrete equipment
HL315 AAC Block In Series Of Autoclave Concrete Block Concrete Equipment
Working principle of Bucket elevator for aac line:
Hopper to scoop up material from the hopper, conveyor belt or chain with the upgrade to the top, flip down around the top rounds, bucket elevator tilt the material into the slot, with bucket elevator drive transmission with general with rubber band, below or above installed in the drive pulley and bend pulley on the following.
Bucket elevator are generally equipped with a chassis, to prevent the dust in the bucket conveyor.
Features of Bucket elevator for AAC line:
1. Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.
2. Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials. Sound seal and little circumstance pollution.
3.Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.
4. The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.
5. Wide application: bucket elevator as one of material handling equipment is used in powder, graininess and patch delivering upward unpolishing and subpolishing scattered materials whose density is less than 1.5t/m³, such as coal, grail, dust coke.
AAC block advantages
(1) light weight
Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.
(2) keeping temperature
It has many are porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as 1/4 or
1/5 of clay brick,so it is best materials now in the world.There are many kinds material,have
(3) High Strength
High pressure steam-curing autoclaving process gives AAC unmatchable strength to weight ratio, higher than even M150 concrete and far exceeds the Indian Building code requirements
(4) Cost saving
Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving.Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%
Application of Bucket elevator for AAC line
Bucket elevator is a fixed mechanical conveyor equipment, mainly lifting powder, granules and small lump materials continuously and vertically, widely used in feed factory, flour mill, rice mill, oil factory, starch factory, grain depot and ports.